PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. These products exhibit enhanced physical and mechanical properties versus standard short fiber products. Benefits of LFT compounds include improved impact strength, elastic modulus, and material strength across wide temperature ranges from subambient to highly elevated. Furthermore, LFT compounds have been shown to offer improved performance in the areas of creep and fatigue performance, improved dimensional stability, and exhibit an exceptional surface finish when compared to traditional highly filled short fiber products.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedFilled & Reinforced | |||
| Appearance | Pellets/GranulesGray Color | |||
| Reinforced | 40% Long Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
- | *** % | ISO 294-4 | Measured on a tensile specimen |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | |
Tensile Modulus | *** Mpa | ISO 1110 | Equilibrium 50% RH |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2 | |
Break | *** Mpa | ISO 1110 | Equilibrium 50% RH |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Break | *** % | ISO 1110 | Equilibrium 50% RH |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
Falling Dart Impact | *** J | ASTM D 5420 | Gardner Impact |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
8 Mpa (1160 psi)（81.6kg/cm²） | *** °C | ISO 75-2/C | Unannealed |
Processing Temperature | ***~*** °C | - | Injection |
Mould temperature | *** °C | - | Injection |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
