OnFlex™ HT thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds is specially formulated to deliver very good compression set performance at elevated temperatures and a high heat resistance. Furthermore, OnFlex™ HT compounds offer excellent mechanical properties, a wide hardness range and good processability.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceEasy processingOzone Resistant | |||
| Appearance | Pellets/Granules | |||
| Processing | InjectionExtrusion | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | 23°C, 2.00 mm |
Viscosity | *** Pa-s | ASTM D 3835 | Apparent Viscosity, 200°C, 11200 sec^-1 |
Viscosity | *** Pa-s | ASTM D 3835 | Apparent Viscosity, 200°C, 1340 sec^-1 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | DIN 53504 | Across Flow, 23°C, 2.00 mm, 200 mm/min |
Break | *** Mpa | DIN 53504 | Flow, 23°C, 2.00 mm, 200 mm/min |
Tensile Elongation | |||
Break | *** % | DIN 53504 | Across Flow, 23°C, 2.00 mm, 200 mm/min |
Break | *** % | DIN 53504 | Flow, 23°C, 2.00 mm, 200 mm/min |
Tear Strength | *** kN/m | ISO 34 | |
Compression Set | *** % | ISO 815 | -10°C, 22 hr |
Compression Set | *** % | ISO 815 | 100°C, 22 hr |
Compression Set | *** % | ISO 815 | 23°C, 72 hr |
Compression Set | *** % | ISO 815 | 70°C, 22 hr |
Stress Relaxation | *** % | ISO 3384 | 100d, 25% compression, Method A |
Stress Relaxation | *** % | ISO 3384 | 168hrs, 25% compression, Method A |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | DIN 53505 | 3 sec, 23°C, 6.00 mm, Injection Molded |
IRHD Hardness | *** - | ISO 48 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
