| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ASTM D792 | |
Mold Shrinkage | | | |
Flow |
***~*** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ASTM D638 | Type I, 5.1 mm/min |
Tensile Strength | | | |
Yield |
*** Mpa | ASTM D638 | Type I, 5.1 mm/min |
Tensile Elongation | | | |
Break |
*** % | ASTM D638 | Type I, 5.1 mm/min |
Flexural Modulus |
*** Mpa
| ASTM D790 | |
Flexural Strength | | | |
- |
*** Mpa | ASTM D790 | |
Poisson Ratio |
*** -
| ASTM E 132 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | | | |
23℃ (73℉) |
*** J/m | ASTM D256 | 3.18 mm, Injection Molded |
Izod Unnotched Impact Strengh | | | |
23℃ (73℉) |
*** J/m | ASTM D256 | 3.18 mm, Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
0.45 Mpa (66 psi)（4.6kg/cm²） |
*** °C | ASTM D648 | Unannealed, 6.35 mm |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | Unannealed, 6.35 mm |
Coefficient of Linear Thermal Expansion | | | |
Flow |
*** E-6 cm/cm/℃ | ASTM E831 | 0 to 32°C |
Flow |
*** E-6 cm/cm/℃ | ASTM E831 | 60 to 100°C |
Across Flow |
*** E-6 cm/cm/℃ | ASTM E831 | 0 to 32°C |
Across Flow |
*** E-6 cm/cm/℃ | ASTM E831 | 60 to 100°C |
Thermal Conductivity |
*** W/(m K)
| ASTM E 1461 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
***~*** Ohm-cm
| ASTM D257 | 3.18 mm |
Surface Resistivity |
***~*** Ohm
| ASTM D257 | 3.18 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
