Edgetek™ XT high performance blends offer outstanding strength, durability and chemical resistance through the combination of Eastman Tritan™ copolyester with other various polymeric resins. Edgetek™ XT blends made with Tritan™ copolyester are available in standard grades or can be customized to meet specific performance requirements.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessHeat ResistanceGood ColoringEasy processingBPA FreeChemical ResistanceHydrolysis Resistance | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
260°C/5.0 kg | *** g/10min | ASTM D1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 3.18 mm |
Across Flow | *** % | ASTM D955 | 3.18 mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | Type I, 51 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 51 mm/min |
Break | *** Mpa | ASTM D638 | Type I, 51 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | Type I, 51 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 13 mm/min |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 13 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.18 mm, Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed, 3.18 mm |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed, 3.18 mm |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | -30 to 30°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
