30% Carbon Fiber Reinforced PEEK Compound with Standard Flowability for Injection Molding Application
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFlame RetardantFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Reinforced | 30% Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Across Flow | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr, 3.18 mm |
Water Absorption | *** % | ASTM D570 | Saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 23°C, Type I, 5.1 mm/min |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | 120°C, 5.0 mm/min |
Break | *** Mpa | ASTM D638 | 23°C, 5.0 mm/min |
Tensile Elongation | |||
Break | ***~*** % | ASTM D638 | Type I, 5.1 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 120°C |
Flexural Modulus | *** Mpa | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 120°C |
- | *** Mpa | ASTM D790 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.18 mm, Injection Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed, 3.18 mm |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | > 146°C |
Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | < 146°C |
Across Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | > 146°C |
Across Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | < 146°C |
Melt Temperature(Tm) | *** °C | ISO 3146 | DSC |
Glass Transition Temperature | *** °C | DSC | |
Thermal Conductivity | *** W/(m K) | ASTM E 1461 | 60°C, in-plane |
Thermal Conductivity | *** W/(m K) | ASTM E 1461 | 60°C, through-plane |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | Internal | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | ***~*** Ohm | ASTM D257 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
