PARTIALLY AROMATIC PA, 65% GLASS FIBER REINFORCED
SPECIALTY PARTIALLY AROMATIC POLYAMIDE BLEND
DEVELOPED AS ALTERNATIVE TO METAL
GOOD STIFFNESS AND TENSILE STRENGTH
VERY LOW WARPAGE
VERY GOOD CREEP RESISTANCE
EXCELLENT SURFACE QUALITY
HIGH DIMENSIONAL STABILITY
PERFORMANCE INDEPENDENT FROM ENVIRONMENTAL CONDITIONS
| Original Document | Technical Datasheet(English&German&Italian) | |||
| Features | High StrengthHigh Stiffness/RigidityGood SurfaceDimensional StabilityLow WarpageCreep ResistantFilled & Reinforced | |||
| Reinforced | 65% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23°C |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | 23°C |
Across Flow | *** % | ISO 294-4 | 23°C |
Water Absorption | *** % | ISO 62 | 24 hr, 23°C |
Water Absorption | *** % | ISO 62 | Saturation, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | Cond. |
Tensile Modulus | *** Mpa | ISO 527 | Dry, 23°C |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | Cond. |
Yield | *** Mpa | ISO 527 | Dry, 23°C |
Tensile Elongation | |||
Break | *** % | ISO 527 | Cond. |
Break | *** % | ISO 527 | Dry, 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Temperature index (TI)-Tensile Strength | |||
20000 h | *** °C | IEC 60216 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Dry, 23°C |
Surface Resistivity | *** Ohm | IEC 60093 | Dry, 23°C |
Comparative Tracking Index (CTI) | |||
Solution A | *** V | IEC 60112 | Dry, 3.2mm |
Dielectric Strength | *** kV/mm | IEC 60243 | Dry, 2mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
