| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** kg/m³
| ISO 1183 | |
Molding Shrinkage | | | |
Flow |
*** % | ISO 294-4, 2577 | |
Across Flow |
*** % | ISO 294-4, 2577 | |
Water Absorption |
*** %
| ISO 62 | 2mm |
Moisture /Humidity Absorption |
*** %
| ISO 62 | 2mm |
Melt Density |
*** kg/m³
| - | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ISO 527-1/-2 | |
Tensile Modulus |
*** Mpa
| ISO 527-1/-2 | Conditioned |
Tensile Strength | | | |
Yield |
*** Mpa | ISO 527-1/-2 | |
Tensile Elongation | | | |
Yield |
*** % | ISO 527-1/-2 | |
Yield |
*** % | ISO 527-1/-2 | |
Nominal Tensile Strain at Break |
*** % | ISO 527-1/-2 | |
Flexural Modulus |
*** Mpa
| ISO 178 | |
Flexural Modulus |
*** Mpa
| ISO 178 | Conditioned |
Puncture | | | |
Energy |
*** J | ISO 6603-2 | -30℃ |
Energy |
*** J | ISO 6603-2 | 23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
-30℃ (-22℉) |
*** kJ/m² | ISO 179/1eA | |
-30℃ (-22℉) |
*** kJ/m² | ISO 179/1eA | Conditioned |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eA | |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eA | Conditioned |
Charpy Unnotched Impact Strengh | | | |
-30℃ (-22℉) |
*** kJ/m² | ISO 179/1eU | |
-30℃ (-22℉) |
*** kJ/m² | ISO 179/1eU | Conditioned |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eU | |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eU | Conditioned |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M |
*** M
| ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75-1/-2 | |
Vicat Softening Temperature(VST) |
*** °C
| ISO 306 | 50℃/h 50N |
Relative Temperature Index(RTI), Imp | | | |
0.75/0.8mm |
*** °C | UL 746B | |
1.5/1.6 mm |
*** °C | UL 746B | |
3.0/3.2 mm |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | | | |
0.75/0.8mm |
*** °C | UL 746B | |
1.5/1.6 mm |
*** °C | UL 746B | |
3.0/3.2 mm |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Str | | | |
0.75/0.8mm |
*** °C | UL 746B | |
1.5/1.6 mm |
*** °C | UL 746B | |
3.0/3.2 mm |
*** °C | UL 746B | |
Specific Heat |
*** J/kg-K
| - | |
Coefficient of Linear Thermal Expansion | | | |
Flow |
*** E-6/K | ISO 11359-1/-2 | |
Across Flow |
*** E-6/K | ISO 11359-1/-2 | |
Melt Temperature(Tm) |
*** °C
| ISO 11357-1/-3 | 10℃/min |
Glass Transition Temperature |
*** °C
| ISO 11357-1/-2 | 10℃/min |
Thermal Conductivity |
*** W/(m K)
| - | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
HB |
*** mm | UL94 | |
HB |
*** mm | UL94 | |
FMVSS |
*** -
| FMVSS 302 | |
Burning Rate |
*** mm/min
| ISO 3795 | 1mm |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-m
| IEC 60093 | |
Volume Resistivity |
*** Ohm-m
| IEC 60093 | Conditioned |
Surface Resistivity |
*** Ohm
| IEC 60093 | Conditioned |
Dissipation Factor | | | |
100Hz |
*** E-4 | IEC 60250 | |
100Hz |
*** E-4 | IEC 60250 | Conditioned |
1MHz |
*** E-4 | IEC 60250 | |
1MHz |
*** E-4 | IEC 60250 | Conditioned |
Dielectric Strength |
*** kV/mm
| IEC 60243-1 | |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
