CoolPoly E2 is a thermally and electrically conductive high strength LCP based flame retardant grade
CoolPoly E-series Thermally Conductive Plastics exhibit electrical conductivity in addition to their thermal conductivity. The electrical conductivity measured as electrical resistivity is commonly in the range 0.1 to 10,000 ohm-cm. This conductivity range is appropriate for shielding electromagnetic and radio frequency energy. CoolPoly E-Series plastics can also be modified to achieve lower levels of electrical conductivity for applications requiring electrostatic dissipation (106 to 1010 ohm-cm). For comparison purposes, unmodified plastics are good electrical insulators (1012 to 1016 ohm-cm) and metals are good electrical conductors (10-6 to 10-1 ohm-cm).
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthThermal ConductiveFlame RetardantElectrically Conductive | |||
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Tensile Modulus | *** Mpa | ISO 527-2/1A | |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2/1A | 5mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2/1A | 5mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | |
Specific Heat | *** J/kg-K | ASTM E 1461 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359-2 | |
Across Flow | *** E-6/°C | ISO 11359-2 | |
Thermal Conductivity | *** W/(m K) | ASTM E 1461 | flow |
Thermal Conductivity | *** W/(m K) | ASTM E 1461 | thruplane |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
