Polypropylene (PP) continuous fiber (uni-directional) reinforced thermoplastic composite tape, 70% glass fiber by weight.
Celstran® CFR-TP PP GF70-13 is a 70% E-glass fiber by weight PP (polypropylene) continuous fiber (uni-directional) reinforced thermoplastic composite tape. This material exhibits a high strength-to-weight ratio, excellent toughness and chemical resistance. It is well suited for industrial, automotive and sporting goods applications where cost and process ability are critical. The material is available in natural and black colors. Alternate tape widths and thicknesses may be available.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessFilled & Reinforced | |||
| Appearance | TapeNatural ColorBlack | |||
| Reinforced | 70% Continuous Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D 3039M | 0° |
Tensile Strength | |||
- | *** Mpa | ASTM D 3039M | 0° |
Tensile Elongation | |||
Break | *** % | ASTM D 3039M | 0° |
Flexural Modulus | *** Mpa | ASTM D790 | 0° |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 0° |
Flexural Strain | |||
break | *** % | ASTM D 790 | 0° |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359-2 | 23-50°C, above Tg |
Across Flow | *** E-6/°C | ISO 11359-2 | 23-50°C, above Tg |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | 10°C/min |
Glass Transition Temperature | *** °C | ISO 11357-1/-2 | 10°C/min |
Thermal Conductivity | *** W/(m K) | ASTM E 1461 | Crossflow |
Thermal Conductivity | *** W/(m K) | ASTM E 1461 | Flow |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
