PA66 30% glass fiber reinforced injection moulding grade, low friction. Heat stabilized. Natural grey colour.
Suitable for parts requiring high stiffness, good mechanical resistance and low friction, along with good heat ageing properties retention. Particularly apt for components requiring improved wear resistance, such as gears, bearings, and cams.
ISO 1043 : PA66-T GF30
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHeat StabilizedGood Heat AgingWear/Abrasion ResistanceLow Friction/WearFilled & Reinforced | |||
| Additive | Heat Stabilizer | |||
| Appearance | Gray Color | |||
| Processing | Injection | |||
| Compliance | RoHS | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | immersion at 23°C, 2mm thk |
Moisture /Humidity Absorption | *** % | ISO 62 | 23°C – 50%RH, 2mm thk |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A | Dry, 1mm/min |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2/1A | Dry, 5mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2/1A | Dry, 5mm/min |
Flexural Modulus | *** Mpa | ISO 178 | Dry, 2mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178 | Dry, 2mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/Bf | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/Af | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | 50°C/h, 50N |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | 10°C/min |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | |||
2mm | *** °C | IEC 60695-2-12 | |
FMVSS | mm/min | FMVSS 302 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Cond., 500V |
Volume Resistivity | *** Ohm-m | IEC 60093 | Dry, 500V |
Surface Resistivity | *** Ohm | IEC 60093 | Cond., 500V |
Surface Resistivity | *** Ohm | IEC 60093 | Dry, 500V |
Comparative Tracking Index (CTI) | |||
Solution A | *** V | IEC 60112 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
