Rilsan® TMVO resin - Rilsan® POLYAMIDE 1010 (PA1010)
Rilsan® TMVO resin is a dried polyamide 1010 resin neat produced from a renewable source. This natural grade is a designed for compounding, filament extrusion and some injection molding applications.
Percentage of renewable carbon according to ASTM D 6866: >99%.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Bio-basedRenewable Resource | |||
| Appearance | Natural Color | |||
| Processing | InjectionExtrusionSpinning/MonofilamentCompounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Biobased content | *** % | ASTM 6866 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Dry |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | Dry, 10°C/min |
Processing Temperature | ***~*** °C | - | Injection Molding |
Mould temperature | ***~*** °C | - | Injection Molding |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
