Rilsan® MB 3610 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance.
The percentage of renewable carbon according to ASTM D 6866 (calculated) is >59%.
Main applications:
- Pneumatic tubing.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | High ImpactGood ToughnessHeat StabilizedBio-basedRenewable ResourceUV Stabiltiy | |||
| Additive | Light StabilizerUV-StabilizerHeat StabilizerPlasticizer | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | ExtrusionProfile ExtrusionTube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Cond. |
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Melt Volume Flow Rate(MVR) | |||
235°C/5.0 kg | *** cm³/10 min | ISO 1133 | Dry |
Water Absorption | *** % | ISO 62 | Dry |
Moisture /Humidity Absorption | *** % | ISO 62 | Dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Cond. |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Strength | |||
at 50% strain | *** Mpa | ISO 527-1/-2 | Cond. |
at 50% strain | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | Cond. |
Break | *** % | ISO 527-1/-2 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Cond. |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Cond. |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | Dry, 10°C/min |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | IEC 60695-11-10 | Dry |
HB | *** mm | IEC 60695-11-10 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
