Rilsan® BESNO P40 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion.
The percentage of renewable carbon according to ASTM D 6866 (calculated) is >89%.
Main applications:
- Fluid transportation.
- Fuel line.
- Tubing for use in motor vehicle.
- Air brake line.
Packaging:
This grade is delivered dried in sealed packaging (25 kg bags, 44 lb bags, 550 kg rigid containers, 1000 lb rigid containers) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat StabilizedBio-basedRenewable ResourceUV Stabiltiy | |||
| Additive | Light StabilizerUV-StabilizerHeat StabilizerLubricantPlasticizer | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | InjectionExtrusionProfile ExtrusionTube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Cond. |
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Melt Volume Flow Rate(MVR) | |||
235°C/10 kg | *** cm³/10 min | ISO 1133 | Dry |
Water Absorption | *** % | ISO 62 | Dry |
Biobased content | *** % | ASTM 6866 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Cond. |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | Cond. |
Yield | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | Cond. |
Yield | *** % | ISO 527-1/-2 | Dry |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Cond. |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Dry |
Puncture | |||
Force | *** N | ISO 6603-2 | Cond., -30°C |
Energy | *** J | ISO 6603-2 | Cond., -30°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Cond. |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Cond. |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Dry |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Dry |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | Dry, 50°C/h 50N |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | Dry |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | Dry, 10°C/min |
Processing Temperature | *** °C | - | Injection Molding |
Mould temperature | *** °C | - | Injection Molding |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | IEC 60695-11-10 | Dry |
HB | *** mm | IEC 60695-11-10 | Dry |
Oxygen Index | *** % | ISO 4589-1/-2 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Cond. |
Surface Resistivity | *** Ohm | IEC 60093 | Cond. |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | IEC 60250 | Dry |
1MHz | *** - | IEC 60250 | Dry |
Dissipation Factor | |||
100Hz | *** E-4 | IEC 60250 | Dry |
1MHz | *** E-4 | IEC 60250 | Dry |
Dielectric Strength | *** kV/mm | IEC 60243-1 | Cond. |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
