Rilsamid® AESN BLACK P202 CTL resin is a plasticized conductive grade designed for tube extrusion.
Rilsamid® AESN BLACK P202 CTL resin is specially designed for conductive multi-layers fuel line applications.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat StabilizedElectrically ConductiveAnti-StaticUV StabiltiyWeather Resistance | |||
| Additive | Light StabilizerUV-StabilizerHeat StabilizerAntistatic AdditivePlasticizer | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | ExtrusionProfile ExtrusionTube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Volume Flow Rate(MVR) | |||
235°C/5.0 kg | *** cm³/10 min | ISO 1133 | Dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | Dry |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 7619-1 | 15s |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | Dry, 10°C/min |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
