Properties:
-Excellent weatherability
-High gloss
-High impact
-Chemical resistant
-Scratch resistant
With Solarkote®, a new grade of acrylic capstocks were invented. Solarkote® is, in fact, the first coating containing PMMA resins that protects against deterioration caused by UV rays. Almost all of the colours are vinyl substrates(including even the darkest shades).
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactHigh GlossAnti-ScratchUV StabiltiyWeather ResistanceChemical Resistance | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ISO 62 | 23°C/50%HR |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 23°C |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2 | 23°C |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 23°C |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
Flexural Strength | |||
Break | *** Mpa | ISO 178 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10 N |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 50 N |
Thermal Conductivity | *** W/m-°C | ASTM C 177 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | |
Haze | *** % | ASTM D1003 | |
Refractive Index | *** - | ISO 489 | Method B |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
