Plexiglas® VS-UVT is a thermoplastic acrylic resin suitable for injection molding. It is a high flow resin designed to provide exceptional UV transmission and excellent transparency making it an outstanding choice for in-vitro diagnostic applications.
Some of the features and benefits of Plexiglas® VS-UVT are:
Exceptional UV transmittance
Excellent transparency
Outstanding scratch resistance
Superior processability
| Original Document | Technical Datasheet-ASTM(English) Brochure (English) | |||
| Features | Light TransmissionAnti-ScratchEasy processingMedical Application/Health CareUV StabiltiyHigh Flow | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | InjectionExtrusion | |||
| Compliance | USP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr immersion |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
Break | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | annealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 50°C/hr; 10N |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 50°C/hr; 50N |
Thermal Conductivity | *** W/(m K) | ASTM C 177 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | ASTM D 635 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | 3.2 mm |
Haze | *** % | ASTM D1003 | 3.2 mm |
Refractive Index | *** - | ASTM D542 | Nd @ 72°F |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
