Plexiglas® V825T is a thermoplastic acrylic resin formulated for injection molding applications. It is characterized by its high heat resistance and excellent melt flow. It is produced in Europe, and typically used for instrument cluster lenses, light guides, thick optics, and exterior rear combination lenses.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat ResistanceLight GuideUV StabiltiyWeather ResistanceHigh Flow | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
230℃/3.8 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294 | |
Water Absorption | *** % | ISO 62 | Method 1, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A/1 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/1A/5 | |
Break | *** Mpa | ISO 527-2/1A/5 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-2/1A/5 | |
Break | *** % | ISO 527-2/1A/5 | |
Flexural Modulus | *** Mpa | ISO 178/A | |
Flexural Strength | |||
- | *** Mpa | ISO 178/A | Conventional Deflection |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179-1/1eA | |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179-1/1eU | |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180/A | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | 50N |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | 10N |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | 3.2 mm |
Haze | *** % | ASTM D1003 | 3.2 mm |
Refractive Index | *** - | ISO 489 | Nd @ 23°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
