Plexiglas® V052
High-molecular-weight resin. Slightly less heat resistance and slightly Extrusion Resins stiffer flowing than Plexiglas® V825 acrylic. Excellent mold release.
| Original Document | Brochure (English) | |||
| Features | Heat ResistanceMold ReleaseUV StabiltiyWeather Resistance | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr immersion |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
Break | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
Falling Dart Impact | *** J | Internal | 152 mm x 152 mm x 3 mm,1.36 kg dart, 6.4 mm radius |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | annealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 50°C/hr; 10N |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 50°C/hr; 50N |
Thermal Conductivity | *** W/(m K) | ASTM C 177 | |
Continuous Use Temperature | |||
Long term | ***~*** °C | Internal | Dependent on part “molded-in”stresses |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | ASTM D 635 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | 3.2 mm |
Haze | *** % | ASTM D1003 | 3.2 mm |
Refractive Index | *** - | ASTM D542 | Nd @ 72°F |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
