Polyether block amide Pebax® 5533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SP grade has been developed to be heat and UV resistant.
Main applications:
Athletic foot wear components.
Ski shoes.
High performance power transmission belts.
Packaging:
This grade is delivered dried in sealed packaging (20 or 25 kg bags) ready to be processed.
Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedMetal PlatingUV StabiltiyWeather Resistance | |||
| Additive | Light StabilizerUV-StabilizerHeat Stabilizer | |||
| Appearance | Pellets/Granules | |||
| Processing | CastingInjectionExtrusionProfile ExtrusionFilm ExtrusionThermoformingResin Transfer Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Cond. |
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4, 2577 | Dry |
Across Flow | *** % | ISO 294-4, 2577 | Dry |
Water Absorption | *** % | ISO 62 | Dry |
Moisture /Humidity Absorption | *** % | ISO 62 | Dry |
Abrasion resistance | *** mm³ | ISO 4649 | Dry, TPE |
Melt Density | *** g/cm³ | - | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Cond. |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | Cond. |
Yield | *** Mpa | ISO 527-1/-2 | Dry |
Break | *** Mpa | ISO 527-1/-2 | Dry, TPE |
at 10% strain | *** Mpa | ISO 527-1/-2 | Dry, TPE |
at 100% strain | *** Mpa | ISO 527-1/-2 | Dry, TPE |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | Cond. |
Yield | *** % | ISO 527-1/-2 | Dry |
Break | *** % | ISO 527-1/-2 | Dry, TPE |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Cond. |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Dry |
Tear Strength | *** kN/m | ISO 34 | Dry, TPE |
Compression Set | *** % | ISO 815 | Dry, TPE, at 23°C, 24h |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Cond. |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Cond. |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 7619-1 | Dry, 15s |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Dry |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | Dry, 50°C/h 50N |
Specific Heat | *** J/kg-K | - | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | Dry |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | Dry, 10°C/min |
Thermal Conductivity | *** W/(m K) | - | |
Processing Temperature | *** °C | - | Injection molding |
Mould temperature | *** °C | - | Injection molding |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | IEC 60695-11-10 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Dry |
Surface Resistivity | *** Ohm | IEC 60093 | Cond. |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | IEC 60250 | Dry |
1MHz | *** - | IEC 60250 | Dry |
Dissipation Factor | |||
100Hz | *** E-4 | IEC 60250 | Dry |
1MHz | *** E-4 | IEC 60250 | Dry |
Comparative Tracking Index (CTI) | |||
- | *** - | IEC 60112 | Cond. |
Dielectric Strength | *** kV/mm | IEC 60243-1 | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
