LOTADER® 4503 is a random terpolymer of ethylene, acrylic ester and maleic anhydride, polymerized by high-pressure autoclave process.
Applications
LOTADER® 4503 is a versatile adhesive for extrusion lamination, designed as a ready for use resin to be used pure.
LOTADER® 4503 gives excellent adhesion to plain, primer-less OPET films as well as to other plastic films like OPP, CPP, OPA and reverse-printed films. It also bonds to easier substrates like PE films, aluminium foil, metalized plastics, paper and board.
Typical uses are:
Adhesive for extrusion lamination of polar and non-polar films and foils, particularly for OPET and
aluminium.
Adhesive for coextrusion coating of LDPE / Tie / EVOH or PA / tie onto OPET or other films.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedGood Adhesion | |||
| Appearance | Pellets/Granules | |||
| Processing | Co-extrusionLaminationExtrusion Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Maleic Anhydride Content | *** % | Internal | |
Methyl Acrylate Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10N |
Melt Temperature(Tm) | *** °C | ISO 11357-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
