LOTADER® 4403 is a random terpolymer of ethylene, acrylic ester and maleic anhydride, polymerized by high-pressure process.
LOTADER® 4403 is a versatile adhesive resin for extrusion lamination/coating, not intended to be diluted.
LOTADER® 4403 provides excellent adhesion to various substrates in extrusion lamination process. It bonds to PE, paper, board, metallized films and corona treated PE, OPP, CPP and OPA films.
Typical applications:
Adhesive for extrusion coating lamination: Film / Tie / Foil.
Adhesive for extrusion coating of LDPE / Tie / PA / Tie onto paper or films.
| Original Document | Technical Datasheet(English) | |||
| Features | Good Adhesion | |||
| Appearance | Pellets/Granules | |||
| Processing | ExtrusionLaminationExtrusion Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Maleic Anhydride Content | *** % | Internal | |
Acrylate Content | *** % | Company | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10N |
Melt Temperature(Tm) | *** °C | ISO 11357-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
