Elium® resins are innovative materials for the production of thermoplastic composites reinforced by continuous glass, carbon or natural fibers.
Elium® resins can be processed by RTM, Infusion and pultrusion depending on the number of parts to be manufactured per day and the specifications of the part.
Elium® resins are processed on similar equipment to that used today for thermoset composites, with similar polymerization cycle times and conditions.
Liquid at room temperature
Easily processed by RTM, infusion and pultrusion
Excellent strength, stiffness and toughness
Assembly by welding and/or adhesives
Elium® 188 O Application:
Wind
Marine
B&C
Elium® 188 O Process:
Infusion
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHigh Stiffness/RigidityGood AdhesionGood Weld | |||
| Appearance | Liquid | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Viscosity | *** Pa-s | Internal | Solution Viscosity |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
- | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
Compressive Modulus | *** Mpa | ISO 14126 | |
Compressive Strength | *** Mpa | ISO 14126 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | ***~*** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 cm/cm/℃ | ISO 2155-1 | |
Processing Temperature | ***~*** °C | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
