| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ASTM D792 | |
Melt Mass Flow Rate(MFR) | | | |
230°C/3.8 kg |
*** g/10 min | ASTM D 1238 | |
Mold Shrinkage | | | |
- |
***~*** % | ASTM D955 | |
Water Absorption |
*** %
| ASTM D570 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | | | |
- |
*** Mpa | ASTM D 638 | |
Tensile Elongation | | | |
Break |
*** % | ASTM D638 | |
Flexural Modulus |
*** Mpa
| ASTM D790 | |
Flexural Strength | | | |
- |
*** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
- |
*** kJ/m² | ISO 179 | |
Charpy Unnotched Impact Strengh | | | |
- |
*** kJ/m² | ISO 179 | |
Izod Notched Impact Strengh | | | |
- |
*** kJ/m² | ASTM D 256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M |
*** M
| ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
0.45 Mpa (66 psi)（4.6kg/cm²） |
*** °C | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | 50°C/hr, 1kg, Unannealead |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | 50°C/hr, 5kg, Unannealead |
Coefficient of Linear Thermal Expansion | | | |
- |
*** E-6/K | ASTM D 696 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
HB |
*** mm | UL94 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission |
*** %
| ASTM D1003 | |
Haze |
*** %
| ASTM D1003 | |
Refractive Index |
*** -
| ASTM D542 | |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
