Altuglas® Luctor CR13 is an impact modified acrylic resin formulated to provide exceptional resistance to ethyl and isopropyl alcohol. It has good clarity and is easily processed, allowing for use in intricate mold cavities.
The resin is also environmental friendly, having more than 25% of its carbon content derived from a bio-based source.
Altuglas® Luctor CR13 is a premier medical resin specifically formulated to withstand contact with IPA.
It is well suited for IV delivery systems and other devices where maximum esistance to alcohols, lipid emulsions, plasticizers, TPN solutions, or new generation oncology drugs is paramount.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ColoringEasy processingFast Cycle TimeGood AdhesionGood WeldBio-basedMedical Application/Health CareBiocompatibleE-beam SterilizableGamma ResistanceEtO sterilizableESCRChemical ResistanceAcid ResistancAlkali resistanceAlcohol ResistantLipid Resistance | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | InjectionExtrusion | |||
| Compliance | ISO10993USP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A50 (10 N) |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | B50 (50 N) |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | 3mm |
Haze | *** % | ASTM D1003 | 3mm |
Refractive Index | *** - | ISO 489 | Method A |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
