The MC/tl Series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The compounds are produced exclusively by a special medical unit and available in translucent colors.
Typical applications
Flexible Connections
Mouthpieces
Seals
Soft touch
Valves
Material advantages
Adhesion to PP
DMF listed
Excellent compression set
For injection molding and extrusion
Free of animal based ingredients
KRAIBURG TPE Medical service package (description below)
Sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)
Tested according to ISO 10993-5
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good AdhesionMedical Application/Health CareBiocompatibleGamma ResistanceEtO sterilizableSteam Resistant | |||
| Appearance | Translucent | |||
| Processing | InjectionExtrusion | |||
| Compliance | Drug Master FileISO10993USP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | Type S2, 200 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 37 | Type S2, 200 mm/min |
Tear Strength | *** N/mm | ISO 34 | Methode B (b)(Graves) |
Compression Set | *** % | ISO 815 | 100°C, 24 hr |
Compression Set | *** % | ISO 815 | 23°C, 72 hr |
Compression Set | *** % | ISO 815 | 70°C, 24 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
