The AD1/CS Series is your material solution for applications with excellent adhesion to polar thermoplastics such as ABS, PC and PC/ABS as well as excellent compression set. The compounds are available in natural and black colors.
Typical applications
Fastenings
Grommets
Membranes
Seals
Material advantages
Easy coloring (compounds in natural colors)
Excellent compression set
Insert molding possible
UL 94 HB listed
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good ColoringGood Adhesion | |||
| Appearance | Black | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | Type S2, 200 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 37 | Type S2, 200 mm/min |
Tear Strength | *** N/mm | ISO 34 | Methode B (b)(Graves) |
Compression Set | *** % | ISO 815 | 100°C, 24 hr |
Compression Set | *** % | ISO 815 | 23°C, 72 hr |
Compression Set | *** % | ISO 815 | 70°C, 24 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619-1 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Adhesion Strength | *** N/mm | VDI 2019 | to ABS |
Adhesion Strength | *** N/mm | VDI 2019 | to PC |
Adhesion Strength | *** N/mm | VDI 2019 | to PC/ABS |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
