The UV/LD/b Series is your material solution for applications requiring high UV resistance. It is particularly appropriate for automotive exterior.
Typical applications
Cowls gaskets
Roof rims
Water deflectors
Window encapsulations
Material advantages
Excellent heat resistance
Excellent mechanical properties
Perfect adhesion to PP
Perfect surface finish
Tested according PV3930 for outdoor use
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Heat ResistanceGood SurfaceGood AdhesionUV Stabiltiy | |||
| Appearance | Black | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 37 | Type S2, 200 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 37 | Type S2, 200 mm/min |
Tear Strength | *** N/mm | ISO 34 | Methode B (b)(Graves) |
Compression Set | *** % | ISO 815 | 100°C, 24 hr |
Compression Set | *** % | ISO 815 | 23°C, 72 hr |
Compression Set | *** % | ISO 815 | 70°C, 24 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
