- Linear SIS triblock copolymer.
- Contains <1% diblock copolymer.
- High styrene, high modulus, low viscosity.
VECTOR 4411A styrenic block copolymer is a linear triblock copolymer with a narrow molecular weight distribution. It has excellent creep resistance and is well-suited for use in hot melt adhesives, disposable diaper applications and the compatibilization of styrenic/olefinic polymer blends.
- VECTOR 4411A SIS is offered as a dense pellet supplied from the United States.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Pellets/Granules | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
Viscosity | *** Cps | ASTM D 2196 | Solution Viscosity, in 25 wt% Toluene (25°C) |
Bulk(Apparent ) Density | *** g/cm³ | ASTM D 1895 | |
Filled/Ash | *** % | ASTM D 5630 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 37 | |
at 300% strain | *** Mpa | ISO 37 | |
Tensile Elongation | |||
Break | *** % | ISO 37 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 1 s |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
