Texin RxT90A resin is an aromatic polyether-based thermoplastic polyurethane. It can be processed by injection molding, extrusion or blow molding.
Texin RxT90A offers outstanding abrasion resistance, impact strength, toughness and flexibility. It also exhibits excellent hydrolytic stability. Typical medical applications include anesthetic connectors, catheters, flexible tubing, film, seals and gaskets and extruded profiles. As with any product, the use of Texin RxT90A resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessWear/Abrasion ResistanceMedical Application/Health CareBiocompatibleE-beam SterilizableEtO sterilizableHydrolysis Resistance | |||
| Processing | InjectionExtrusionBlow Molding | |||
| Compliance | FDAISO10993 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
200℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 2.54 mm |
Across Flow | *** % | ASTM D955 | 2.54 mm |
Abrasion resistance | *** mg/1000cy | ASTM D 3489 | H-18, 1,000-g Load |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Flexural Modulus | *** Mpa | ASTM D790 | 73°F (23°C) |
Tear Strength | *** kN/m | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 73°F (23°C) |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate A |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Yellowness Index | *** - | ASTM E 313 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
