Texin 985U resin is an aromatic polyether-based thermoplastic polyurethane with a Shore hardness of approximately 85A. It can be processed by injection molding, extrusion, or blow molding.
Texin 985U resin offers good clarity and outstanding abrasion resistance, impact strength, toughness, and flexibility. It is stabilized against degradation due to heat and UV exposure. It also exhibits excellent hydrolytic stability, as well as excellent microbial resistance. Typical applications include belting, hose, cable jackets, hose jackets, seals and gaskets, athletic soles, casters, mine screens, tubing, film, and extruded profiles. Texin 985U natural color resin is listed under NSF Standard 61 for use in potable water applications. As with any product, use of Texin 985U resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessHeat ResistanceHeat StabilizedWear/Abrasion ResistanceDrinking Water ContactUV StabiltiyHydrolysis Resistance | |||
| Additive | UV-StabilizerHeat Stabilizer | |||
| Processing | InjectionExtrusionBlow Molding | |||
| Compliance | NSF | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 2.54 mm |
Across Flow | *** % | ASTM D955 | 2.54 mm |
Abrasion resistance | *** mg/1000cy | ASTM D 3489 | H-18, 1,000-g Load |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 50% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Flexural Modulus | *** Mpa | ASTM D790 | -22°F (-30°C) |
Flexural Modulus | *** Mpa | ASTM D790 | 73°F (23°C) |
Tear Strength | *** kN/m | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | 22 Hours at 73°F (23°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 73°F (23°C) |
Compressive Strength | *** Mpa | ASTM D 575 | 10% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 15% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 2% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 20% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 25% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 5% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 50% Deflection |
Rebound Resilience | *** % | ASTM D 2632 | Bayshore Resilience |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate A |
Glass Transition Temperature | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
