Texin 945U resin is a polyether-based thermoplastic polyurethane with a Shore hardness of approximately 45D. It can be processed by injection molding, extrusion, or blow molding.
Texin 945U resin exhibits inherent resistance to hydrolysis as well as outstanding abrasion resistance, impact strength, toughness, and flexibility. In addition, this grade provides good clarity and is stabilized against degradation due to heat and UV exposure. Texin 945U natural color resin is listed under NSF Standard 61 for use in potable water applications. Typical applications include boots, nonregulated animal identification tags, seals, pads, tubing, cable jacketing, sheet and profiles. As with any product, use of Texin 945U resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessHeat ResistanceHeat StabilizedWear/Abrasion ResistanceDrinking Water ContactUV StabiltiyHydrolysis Resistance | |||
| Processing | InjectionExtrusionBlow Molding | |||
| Compliance | NSF | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 2.54 mm |
Across Flow | *** % | ASTM D955 | 2.54 mm |
Abrasion resistance | *** mg/1000cy | ASTM D 3489 | H-18, 1,000-g Load |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 50% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Flexural Modulus | *** Mpa | ASTM D790 | 158°F (70°C) |
Flexural Modulus | *** Mpa | ASTM D790 | 73°F (23°C) |
Tear Strength | *** kN/m | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | 22 Hours at 73°F (23°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 73°F (23°C) |
Compressive Strength | *** Mpa | ASTM D 575 | 10% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 15% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 2% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 20% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 25% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 5% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 50% Deflection |
Rebound Resilience | *** % | ASTM D 2632 | Bayshore Resilience |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate A |
Glass Transition Temperature | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
