Texin 260 resin is an aromatic polyester-based thermoplastic polyurethane with a Shore hardness of approximately 60D. It can be processed by injection molding; extrusion processes are not recommended.
Texin 260 resin offers outstanding abrasion resistance, impact strength, toughness, and flexibility. It also exhibits excellent fuel and oil resistance. Texin 260 natural color resin complies with FDA food-contact regulations 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber Articles Intended for Repeated Use), subject to the limitations of these and any other applicable regulations. Typical applications include toplifts, casters, grommets, and seals. As with any product, use of Texin 260 resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessWear/Abrasion ResistanceFood ContactFuels ResistantOil Resistant | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 2.54 mm |
Across Flow | *** % | ASTM D955 | 2.54 mm |
Abrasion resistance | *** mg/1000cy | ASTM D 3489 | H-18, 1,000-g Load |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 50% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Flexural Modulus | *** Mpa | ASTM D790 | 73°F (23°C) |
Tear Strength | *** kN/m | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | 22 Hours at 73°F (23°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 158°F (70°C) |
Compression Set | *** % | ASTM D 395 | Postcured, 22 Hours at 73°F (23°C) |
Compressive Strength | *** Mpa | ASTM D 575 | 10% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 15% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 2% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 20% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 25% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 5% Deflection |
Compressive Strength | *** Mpa | ASTM D 575 | 50% Deflection |
Rebound Resilience | *** % | ASTM D 2632 | Bayshore Resilience |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate A |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 mm/mm/℃ | ASTM D 696 | |
Glass Transition Temperature | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
