Baytec MS-080 modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer is used in the manufacture of high-property solid cast polyurethane elastomers. As with any product, use of Baytec MS-080 prepolymer in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Liquid | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Abrasion resistance | *** mg/1000cy | ASTM D 4060 | H-18 Wheel, 1,000-g |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 200% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** N/mm | ASTM D 624 | Die C |
Tear Strength | *** N/mm | ASTM D 1938 | Split |
Compression Set | *** % | ASTM D 395 | 22 hours at 70°C |
Compressive Strength | *** Mpa | ASTM D 575 | 10% |
Compressive Strength | *** Mpa | ASTM D 575 | 15% |
Compressive Strength | *** Mpa | ASTM D 575 | 2% |
Compressive Strength | *** Mpa | ASTM D 575 | 20% |
Compressive Strength | *** Mpa | ASTM D 575 | 25% |
Compressive Strength | *** Mpa | ASTM D 575 | 5% |
Compressive Strength | *** Mpa | ASTM D 575 | 50% |
Rebound Resilience | *** % | ASTM D 2632 | Bayshore Resilience |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
