Baytec GS-V85A is a two-component, one-shot system that yields a solid polyurethane elastomer. The isocyanate component is an isocyanate-terminated (MDI) polyester prepolymer, and the polyol component is a polyethylene/polybutylene adipate diol. The Baytec GS-V85A system is used in the production of cast polyurethane elastomers. As with any product, use of the Baytec GS-V85A system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Liquid | |||
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
- | *** % | ASTM D 1938 | |
Tear Strength | *** N/mm | ASTM D 624 | Die C |
Tear Strength | *** N/mm | ASTM D 1938 | Split |
Compression Set | *** % | ASTM D 395 | 22 hours at 70°C |
Rebound Resilience | *** % | ASTM D 2632 | Bashore Rebound |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
