Baytec 352 is a two-component, one-shot system that yields a solid polyurethane elastomer with good mechanical properties in the hardness range of Shore 75A to 90A. As with any product, use of Baytec 352 in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Liquid | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Abrasion resistance | *** mg/1000cy | ASTM D 3489 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
- | *** % | ASTM D 1938 | |
Tear Strength | *** N/mm | ASTM D 624 | Die C |
Tear Strength | *** N/mm | ASTM D 1938 | Split |
Compression Set | *** % | ASTM D 395 | 22 hours at 70°C |
Rebound Resilience | *** % | ASTM D 2632 | Bashore Rebound |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
