This is a semi-rigid polyurethane foam system composed of Bayfill 53IF40 U polyol blend and Desmodur ® 58IF07 M polyisocyanate. It is used in the production of soft-touch panels, such as automotive instrument panels. The foam system is supplied as two liquid components. Component A, Desmodur 58IF07 M, is a polymeric diphenylmethane diisocyanate product. Component B , Bayfill 53IF40 U, is a formulated polyether polyol blend. As with any product, use of Bayfill 53IF40 U system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
| Original Document | Technical Datasheet(English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 3574A | Typical Molded Density |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 3574E | |
Tensile Elongation | |||
- | *** % | ASTM D 3574E | |
Compression Set | *** % | ASTM D 3574D | 50% compression |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Compressive Hardness | *** Mpa | ASTM D 3574 | 50% |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
