Elastollan® C60AW is a polyester-based thermoplastic polyurethane (TPU) containing a plasticizer. It exhibits excellent abrasion resistance and toughness, good hydrolytic stability, good heat, oil, fuel and solvent resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan® C60AW is supplied uncolored in pellet form.
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessHeat ResistanceWear/Abrasion ResistanceHydrolysis ResistanceFuels ResistantOil ResistantAnti-Solvent | |||
| Additive | Plasticizer | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/3.8kg | ***~*** g/10 min | ASTM D 1238 | |
Abrasion resistance | *** mm³ | Internal | DIN Abrasion |
Abrasion resistance | *** mg | ASTM D 1044 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D 412 | |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 22h at 23 ºC |
Compression Set | *** % | ASTM D 395 | 22h at 70ºC |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Glass Transition Temperature | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
