Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, good tensile strength, good damping and resilience performance and superior low temperature flexibility.
Typical applications
Sport-shoe soles and accessories, Skiboot shells, technical mouldings, e.g. seals, castor tyres, tubing.
Certain UV stabilised B grades are available on request
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturWear/Abrasion Resistance | |||
| Applications | Pipes/TubesShoes/FootwearShoe/Footwear SolesSki BootsSealsCastor Tyres | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateDynamic Shear modulus-temperatureStress-strain (TPE) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | |
at 20% strain | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Compression Set | *** % | ISO 815 | at 70°C, 24h |
Compression Set | *** % | ISO 815 | at room temperature, 72h |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1 | |
23℃ (73℉) | *** kJ/m² | ISO 179-1 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hydrolytic Stability | |||
Tensile Strength | *** Mpa | DIN 53504 | at 80°C for 21 days |
Tensile Elongation | *** % | DIN 53504 | at break , at 80°C for 21 days |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
