Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties, very good damping and resilience performance, heat resistance and improved cycle times.
Typical applications
(Automotive) e.g. sealings, stop dampers, cable jackets.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceFast Cycle Time | |||
| Applications | Automotive PartsWire and Cable JacketsSealsStop Dampers | |||
| Markets | Automotive | |||
| Diagrams | Viscosity-shear rateShearstress-shear rate | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | |
at 20% strain | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Compression Set | *** % | ISO 815 | at 100°C, 24h |
Compression Set | *** % | ISO 815 | at 70°C, 24h |
Compression Set | *** % | ISO 815 | at room temperature, 72h |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1 | |
23℃ (73℉) | *** kJ/m² | ISO 179-1 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 7619 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A 120°C/h |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hydrolytic Stability | |||
Tensile Strength | *** Mpa | DIN 53504 | for 21 days at 80°C |
Tensile Elongation | *** % | DIN 53504 | at break , for 21 days at 80°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
