Elastollan® 1195A is specifically formulated for extruded profile, sheet and film applications. It exhibits excellent abrasion resistance, toughness, transparency, very good low temperature flexibility, hydrolytic stability and fungus resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan® 1195A is rated UL-94 HB in vertical flame test for wall thicknesses of 0.75 and 3.0 mm. Elastollan® 1195A also conforms to the FDA food contact regulations as described in book 21, section 177.2600 for wet food contact applications. Elastollan® 1195A also has NSF Standard 61 "Water Contact Material" certification. Elastollan®1195A is supplied uncolored and in diced or pelletized form.
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturGood ToughnessWear/Abrasion ResistanceFood ContactDrinking Water ContactHydrolysis Resistance | |||
| Appearance | Clear/Transparent | |||
| Processing | ExtrusionSheet ExtrusionProfile ExtrusionFilm Extrusion | |||
| Compliance | FDANSF | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
205℃/8.7 kg | ***~*** g/10 min | ASTM D 1238 | |
Abrasion resistance | *** mm³ | Internal | DIN Abrasion |
Abrasion resistance | *** mg | ASTM D 1044 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D 412 | |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Tear Strength | *** N/mm | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 22h at 23 ºC |
Compression Set | *** % | ASTM D 395 | 22h at 70ºC |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Glass Transition Temperature | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
