Thermoplastic Polyether Polyurethane Elastomers with outstanding hydrolysis resistance, low temperature flexibility and resistance to micro-organisms.
Typical applications
Cable jackets, plugs and terminations, spiral tubing, Films, ski-boot shells, ear tags, technical mouldings like mining screens, railway pads, seals.
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturHydrolysis Resistance | |||
| Applications | FilmPipes/TubesWire and Cable JacketsSki BootsPlugsTerminationsEar TagsMining Screensrailway padsSeals | |||
| Technical Notes | Gas permeability | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateDynamic Shear modulus-temperatureStress-strainSecant modulus-strainStress-strain (TPE) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | |
at 20% strain | *** Mpa | DIN 53504 | |
at 100% strain | *** Mpa | DIN 53504 | |
at 300% strain | *** Mpa | DIN 53504 | |
Tensile Elongation | |||
Break | *** % | DIN 53504 | |
Tear Strength | *** N/mm | ISO 34 | |
Compression Set | *** % | ISO 815 | at 70°C, 24h |
Compression Set | *** % | ISO 815 | at room temperature, 72h |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1 | |
23℃ (73℉) | *** kJ/m² | ISO 179-1 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 7619 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hydrolytic Stability | |||
Tensile Strength | *** Mpa | DIN 53504 | at 80°C for 42 days |
Tensile Elongation | *** % | DIN 53504 | at break , at 80°C for 42 days |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
