Type: Pearlstick™ 5714 TPU is a Polyether-Type Thermoplastic Polyurethane (TPU).
Features: Low Temperature Flexibility, Excellent Abrasion, Fungal, and Chemical Resistance and Hydrolytic Stability. Adhesives can be applied from solution or extruded as a melt coating. The resin is lightly dusted with calcium stearate and contains UV stabilizer.
Uses: Various adhesive and fabric coating, magnetic media binder and cast films for lamination.
| Original Document | Technical Datasheet(English) | |||
| Availability | North AmericaLatin AmericaSouth & Central America | |||
| Features | High Impact at Low TemperaturWear/Abrasion ResistanceUV StabiltiyChemical ResistanceHydrolysis Resistance | |||
| Additive | UV-Stabilizer | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Viscosity | *** Pa-s | Internal | Brookfield, 15% T.S. in Cyclohexanone |
Viscosity | *** Pa-s | Internal | Brookfield, 15% T.S. in THF |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 638 | |
at 300% strain | *** Mpa | ASTM D 638 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Break | *** % | ASTM D 412 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Glass Transition Temperature | *** °C | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
