Type: Pearlstick® 5713 TPU is a Polyester-Type Thermoplastic Polyurethane (TPU).
Features: It has the highest heat resistance of any Pearlstick TPU resin used in adhesives. Supplied as pale amber granules, it is soluble in THF or THF/MEK blends. Higher heat resistance, tensile and bond strengths can be achieved with the addition of diisocyanates, peroxides, epoxies and polyfunctional amides.
Uses: Hot melt adhesive, solution cast films for lamination on fabrics.
| Original Document | Technical Datasheet(English) | |||
| Availability | North AmericaLatin AmericaSouth & Central America | |||
| Features | Heat ResistanceGood Adhesion | |||
| Appearance | Pellets/GranulesBrown | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Viscosity | ***~*** Pa-s | Internal | Brookfield, 15% T.S. in THF |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 638 | |
at 300% strain | *** Mpa | ASTM D 638 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Break | *** % | ASTM D 412 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Glass Transition Temperature | *** °C | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
