Type: Pearlbond™ 5717 NT2 is a Polyester-Type Thermoplastic Polyurethane (TPU).
Features: Hot Melt Adhesive with a low melting range.
Uses: Extrusion, powder coating.
| Original Document | Technical Datasheet(English) | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Good Adhesion | |||
| Processing | ExtrusionCoating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | ISO 2781 | 20ºC |
Melt Mass Flow Rate(MFR) | |||
160℃/2.16 kg | ***~*** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | |
Break | *** Mpa | ASTM D 412 | |
at 50% strain | *** Mpa | ASTM D 412 | |
at 50% strain | *** Mpa | ISO 527 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ISO 527 | |
at 300% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Break | *** % | ISO 527 | |
Break | *** % | ASTM D 412 | |
Tear Strength | *** N/mm | ISO 34 | Nicked |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore A hardness | *** A | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | MQSA 70A | Kofler Melting Point |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
