Type: Estane® S190A is a Shore 92A, polyester type thermoplastic polyurethane (TPU). FDA approved (21 CFR 177.2600, 177.1680)
Uses: Injection Molding
| Original Document | Technical Datasheet(English) | |||
| Availability | Asia | |||
| Processing | Injection | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** kg/cm² | ASTM D 412 | |
at 100% strain | *** kg/cm² | ASTM D 412 | |
at 300% strain | *** kg/cm² | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** kg/cm | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | At 23°C X22hr |
Compression Set | *** % | ASTM D 395 | At 70°C X22hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
