Type: L194A is a Shore 95A, polyester grade thermoplastic polyurethane (TPU)
Uses: Injection Molding
| Original Document | Technical Datasheet(English) | |||
| Availability | Asia | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** kg/cm² | ASTM D 412 | |
at 100% strain | *** kg/cm² | ASTM D 412 | |
at 300% strain | *** kg/cm² | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** kg/cm | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | At 23°C X22hr |
Compression Set | *** % | ASTM D 395 | At 70°C X22hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Glass Transition Temperature | *** °C | ASTM D 1525 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
