Type: Estane® GP 55DB is an aromatic polyester-based thermoplastic polyurethane (TPU).
Appearance: Translucent spherical pellets.
Uses: Injection molding parts
| Original Document | Technical Datasheet(English) | |||
| Appearance | Pellets/GranulesTranslucent | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 2781 | |
Abrasion resistance | *** mm³ | ISO 4649 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | |
at 50% strain | *** Mpa | ISO 527-1/-2 | |
at 100% strain | *** Mpa | ISO 527-1/-2 | |
at 300% strain | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | |
Tear Strength | *** N/mm | ISO 34 | Nicked |
Tear Strength | *** N/mm | ISO 34 | Unnicked |
Modulus of Elasticity | *** Mpa | ISO 527 | tensile test |
Compression Set | *** % | ISO 815 | 22 hrs @ 22° C |
Compression Set | *** % | ISO 815 | 22 hrs @ 70° C |
Rebound Resilience | *** % | ISO 4662 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
