Type: Estane® 58277 is a 92A aromatic Polyester-Based Thermoplastic Polyurethane (TPU).
Features: Excellent physical properties, good chemical resistance and wide processing window for extrusion.
Uses: Blown and flat die/cast film extrusion, Injection and blow molding.
| Original Document | Technical Datasheet(English) | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Easy processingChemical Resistance | |||
| Processing | InjectionExtrusionFilm ExtrusionBlow Molding | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Abrasion resistance | *** mg/1000cy | ASTM D 3389 | 1000 rev |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** N/mm | ASTM D 624 | Graves |
Tear Strength | *** N/mm | ASTM D 470 | Trouser |
Tensile Set | *** % | ASTM D 412 | 200% elongation |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 5 sec |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | Kofler Melt Point |
Melt Temperature(Tm) | *** °C | Internal | by DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | pressed between glass |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
