Type: Estane® 58206 is an 85A aromatic Polyester-Based Thermoplastic Polyurethane (TPU).
Features: Good Flexibility at Low Temperatures and Improved Weathering Performance.
Uses: Flat Die/Cast Film Extrusion and Hose/Profile Extrusion, Injection Molding
| Original Document | Technical Datasheet(English) | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | High Impact at Low TemperaturWeather Resistance | |||
| Processing | InjectionExtrusionProfile ExtrusionFilm ExtrusionTube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Abrasion resistance | *** mg/1000cy | ASTM D 3389 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Tear Strength | *** N/mm | ASTM D 624 | Graves |
Tear Strength | *** N/mm | ASTM D 470 | Trouser |
Tensile Set | *** % | ASTM D 412 | 200% elongation |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 5 sec |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
Glass Transition Temperature | *** °C | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
