Eastman TREVA™ is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact. TREVA is chemically resistant, dimensionally stable and has excellent flow, BPA-free and low birefringence. The United States Department of Agriculture's (USDA's) BioPreferred® program has CertifiedEastman TREVA™ Engineering Bioplastic GC6011 with a biobased content of 45%.
Key Attributes:
BPA-free
Dimensional stability
Excellent chemical resistance
Excellent flow
Good clarity
Low birefringence
Application/Uses:
Complex and intricate parts
Cosmetics
Electronic display applications (lenses and covers)
Electronics and housings
Wearable devices and headphones
| Original Document | Technical Datasheet(English) | |||
| Features | Dimensional StabilityBio-basedBPA FreeChemical ResistanceHigh Flow | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
- | *** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 h immersion |
Biobased content | *** % | - | USDA |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-40℃ (-40℉) | *** J/m | ASTM D256 | |
23℃ (73℉) | *** J/m | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Conditioned 4 hours @ 70°C |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Conditioned 4 hours @ 70°C |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Conditioned 4 hours @ 70°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
